<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=135060013973288&amp;ev=PageView&amp;noscript=1">

The FILTERSCAN WiFi® Home affordable airflow sensor and differential pressure monitor sends you a text or email when it's time to change your home's air furnace filter.

    The Importance Of Keeping Up With Emerging Tech

    Posted by CleanAlert Blog Team on Aug 12, 2016 9:00:00 AM

    Keeping up with new building technology is challenging, due to the huge number of advances every year. But if maintenance and engineering managers do not keep up, they risk missing opportunities to decrease costs and improve tenant comfort and staff productivity.

    As managers, it is unequivocally critical to be informed of the newest technology and to understand its benefits and limitations. Fail to do this and managers risk getting run over by technology advances.

    When a piece of older equipment nears its end of life, one option is to pay a bit more money on a more efficient, state-of-the-art replacement. The small additional capital cost will often be paid back with energy savings in just a couple of years, and over the life of the equipment, that can suggest big savings for the facility — which is good news for those on the corporate level.

    bigstock-Cropped-shot-of-a-young-man-wo-93414989.jpg

    Several new technologies can benefit every type of facility, so managers have no one to blame but themselves for missing the opportunities. They include:

    Lighting. Light-emitting-diode (LED) technology and other high-efficiency products are getting a big push because lighting is such a large percentage of energy use in buildings. But does an LED fixture that costs $400 and uses 20 percent less energy than a $200 high-efficiency T8 make fiscal sense? Is a $200 high-efficiency T8 better than a $120 run-of-the-mill T8? The answers often depend on utility rates and labor costs, but knowing the limitations allows managers to leverage the capital budget most effectively.

    Motors and drives. Variable-frequency drives (VFD) and high-efficiency motors are no-brainers. Motors die all the time, and the additional costs to replace the dead motor with a VFD and a high-efficiency unit is more than offset by the energy savings.

    Exhaust controls. Each cubic foot per minute (CFM) of exhaust costs about $5.50 per year, so use VFDs and static duct-pressure monitoring to control exhaust. Imagine a facility with three 5,000 CFM fans running regularly. Reducing the load by 20 percent over the course of the year results in more than $16,000 in savings.

    Controls. Consider an intelligent building- or lighting-control system. Control HVAC systems to operate only when needed, make them automatically adjustable to the actual load and use free cooling in cold weather. Have the lighting-control system automatically turn out lights in unoccupied buildings or spaces.

    Uninterruptible power supply (UPS). The standard dual-conversion UPS is 90-97 percent efficient, losing a good deal of its power in the form of heat. Flywheel and high-efficiency UPS that use line-interactive or hybrid technology — dual conversion on demand — can be 96-99 percent effective. Batteries are a major source of failure and maintenance costs, and flywheel technology can decrease the rates of failure and maintenance costs drastically. For instance, a 500-kilowatt UPS system in a data center in a region with an energy rate of $0.12 per kilowatt-hour will save $16,000 per year if it increases its UPS efficiency by 3 percent. That will make any CFO happy.

    Retrocommissioning. A new building might be highly efficient when it opens, but as time passes, the building demands retro-commissioning to maintain its efficiency. Technicians lockout controls for maintenance but put them back in place. They set a motor on manual for a particular event but never put it back to automatic. All of these moves will use more energy, and retro-commissioning can identify and solve all of them.

    Collecting Information

    Managers are busy, so how can they possibly find time to produce a strategy to keep up with technology advances? The real question is, how can they afford not to?

    Design a plan and process for updating supervisors, engineers, and technicians on the latest technology. Have a detailed budget, and make sure to use the budget every year. Put someone in charge of designating the budget, preferably someone who will benefit immediately from the training.

    Use vendors and consulting engineers as free resources since staying on top of technology is their job. Ask a consulting design engineer to visit the job site and train staff for free, since educating technicians also benefits those in the design industry.

    Ignorance breeds fear, and newer technology is often, but not always, the best design approach. But if managers do not understand these technologies, fear takes over; they ignore the technologies, and design suffers.

    Technology Strategy

    The number of new technology is mind-boggling. How can managers stay current?

    Pick one topic to cover each month or two months. Research that topic, or better yet, assign it to a staff member. Then have that person present the topic to the rest of the department. The best way to understand is to teach, and focusing on one topic will create a framework to prevent getting lost in all the technologies.

    Beyond daily maintenance, being aware of the latest technology also will assist managers in their design and construction roles. Often the result is a facility with characteristics a manager wants and understands.

    Be practical. Learn how to assess the benefits and drawbacks of a brand new technology. Discover how to perform a rough analysis of life-cycle costs to decide if the upfront cost of a new technology outweighs the long-term energy or operations and maintenance benefits. How will energy costs affect it? How will it affect manpower? If a manager restores fluorescent fixtures that require re-lamping every 15,000 hours with LED fixtures that may last more than 50,000 hours, how many hours of maintenance could that save annually?

    Attend facility engineering trade shows, and get involved with local chapters of national or international organizations of facility managers, such as the International Facility Management Association (IFMA). It is amazing what managers can learn from just being around other facility folks. Going out to dinner or a bar and talking shop will help managers become a lot more familiar with newer technologies, and it will aid them in realizing where they need to grow.

    Staying on top of current technology advances can be a daunting task. However, if managers take full advantage of them, adequately fund an education process, and take complete advantage of the available resources, the benefits can be astounding.

    subscribeforupdates.jpg

    Written by Andrew Meyers

    Originally posted on facilitiesnet.com